31 October 2023 03:26 15 - edited 30 April 2024 11:02 11
We are now beginning the roll out of Ford Power-Up 6 software updates to our customers in Europe. Details of which can be found later in this post.
Please read this first for Ford Power-Up 6
To ensure a smooth delivery of these updates we strongly recommend:
1. Please check your ‘Automatic Software Updates’ setting. If you haven’t already done so, I recommend you switch this ‘on’. To do this select the vehicle icon on your SYNC 4A screen > Settings > System Updates > Automatic Updates and turn this ON. This will help ensure that your vehicle is always up to date and ready for future updates. If you choose to leave this option off, you will still be notified of each software update at which point you can accept or decline it. However, if you decline or defer a software update, or the notification expires, please note you will not receive any further updates until that update has been accepted.
2. Mach-E, Ranger & Bronco only. Some of our updates may require your vehicle to be switched-off, locked and not be used for a short period while a software update is installed. Please go to your SYNC 4A screen > Settings > System Updates > Recurring Update Schedule and select a convenient time every day when your vehicle can be updated. If your vehicle is in use at any of those times, don’t worry, the installation will be postponed to the next available day and time in your schedule.
This is particularly important for Ford Power-Up 6 for Mustang Mach-E
The following is also very important to ensure undisrupted delivery:
3. All of the Ford Power-Up Software Updates in this and previous threads must be completed over-the-air and not via a Dealer or the Dealer tool. Ford Power-Up Software Updates are always the most up-to date software versions available and having them delivered over-the-air ensures that you will continue to receive future updates smoothly.
4. We have been made aware of various spurious advice being given on various internet sites and discussion pages in relation to the successful downloading and installation of Ford Power-Up software updates. In many instances, this advice may not have been provided by Ford or directly sanctioned by us, may have been incorrectly presented and be inaccurate, may require specific repair procedures to be followed, and may if improperly applied result in damage to your vehicle and future concerns in receiving software updates. We strongly advise you to only follow advice provided directly by Ford or a Ford Authorised Repairer.
We deploy updates, when they become available, in batches across a period of time. The vehicles selected for each batch will be chosen at random, so please don’t worry if you see someone online receive an update before you do, we haven’t forgotten you! It may take a few weeks for your updates to start arriving and there may also be a few weeks or more between each update. Your car will need to be driven regularly in order to receive all of the updates, if you are away on your holidays or business without your car it’ll be alright and the updates will resume once you are back home and on the road again.
With the many factors involved in deploying software updates to a vehicle, in a small number of cases, it may take more than one attempt to successfully deploy an update. If you do happen to receive an unsuccessful update please don’t panic, we will manage these situations remotely and ensure re-deployment happens, you won’t need to do anything.
Ford Power-Up Software Update 6 Summary
Please note: Different vehicles and different model years may receive different updates due to different SYNC 4 systems and different vehicle content.
Some updates will be background updates. You will not notice any difference in your vehicle following these particular updates. These are essential to the continued smooth running of your vehicle’s connectivity, over-the-air functionality, and digital products and services such as FordPass. They must all be installed in order to receive any subsequent updates and new features.
21MY Mustang Mach-E - UPDATE SCHEDULE REQUIRED (see 2. above)
Ford Power-Up 6.1.0 – Background updates
Ford Power-Up 24-PU-0102-SVD-FX - Background updates
(for some customers this replaces 6.1.0, for those with 6.1.0 it arrives anytime before 6.4.0)
Ford Power-Up 6.2.1 – SYNC updates (see next section for details)
Ford Power-Up 6.3.0 - Background updates
Ford Power-Up 6.4.0 - Background updates
Ford Power-Up 23-PU1119-HV-BAT - Background updates
(only a small number of vehicles require this update and most will not receive it)
Ford Power-Up 23-PU1113-UNX-DC - Background updates
Ford Power-Up 6.5.0 - Heating & Ventilation updates (see next section for details)
Ford Power-Up 24-PU0102-CHG-SUFX - Powertrain updates (see next section for details)
Ford Power-Up 23-PU0110-RAD-PS - Audio Control update (See next section for details)
Ford Power-Up 23-PU0924-DLDC - Body Control update (See next section for details) *NEW
Ford Power-Up 24-PU0121-FTDI-FX - Body Control & Frunk update (See next section) *NEW
22MY Mustang Mach-E - UPDATE SCHEDULE REQUIRED (see 2. above)
Ford Power-Up 6.1.0 – Background updates
Ford Power-Up 24-PU-0102-SVD-FX - Background updates
(for some customers this replaces 6.1.0, for those with 6.1.0 it arrives anytime before 6.4.0)
Ford Power-Up 23-PU1103-NAT-VCE - SYNC updates (see next section for details)
Ford Power-Up 6.3.0 - Background updates
Ford Power-Up 6.4.0 - Background updates
Ford Power-Up 23-PU1113-UNX-DC - Background updates
(this update can arrive anytime after 6.3.0 and in-between any subsequent updates)
Ford Power-Up 6.5.0 - Heating & Ventilation updates (see next section for details)
Ford Power-Up 24-PU0102-CHG-SUFX - Powertrain updates (see next section for details)
Ford Power-Up 23-PU0110-RAD-PS - Audio Control update (See next section for details)
Ford Power-Up 23-PU0924-DLDC - Body Control update (See next section for details) *NEW
Ford Power-Up 24-PU0121-FTDI-FX - Body Control & Frunk update (See next section) *NEW
23MY Mustang Mach-E
Ford Power-Up 6.1.0 – Background updates
Ford Power-Up 6.2.0 – SYNC updates (see next section for details)
Ford Power-Up 23-PU1103-NAT-VCE - SYNC updates (see next section for details)
Ford Power-Up 6.3.0 - Background updates
Ford Power-Up 24-PU-0102-SVD-FX - Background updates
Ford Power-Up 23-PU1113-UNX-DC - Background updates
(this update can arrive anytime after 6.3.0 and in-between any subsequent updates)
23MY Bronco
Ford Power-Up 6.1.0 – Background updates
Ford Power-Up 24-PU-0102-SVD-FX - Background updates
Ford Power-Up 4 and 5 details can be found HERE
Ford Power-Up 3 details can be found HERE
Ford Power-Up Software Update 6 Details
For easier reading, I’m excluding background updates and am only providing details of software updates with notable driver content.
See summary above for applicable vehicles for each Ford Power-Up
Ford Power-Up 6.2.0 / Ford Power-Up 23-PU1103-NAT-VCE / Ford Power-Up 6.2.1
Note: 23-PU1103-NAT-VCE is the latest version with minor background tweaks. Mustang Mach-E Customers who have already received 6.2.0 will also receive this update. Customers who have not received 6.2.0, will only receive 23-PU1103-NAT-VCE. 21MY Mustang Mach-e customers will only receive the 6.2.1 version. The updates below are the same for either version.
This Ford Power-up brings several updates to SYNC for Mustang Mach-E:
For 23MY Mustang Mach-E owners in the UK with BlueCruise, we have made another update to your SYNC screen and an update to BlueCruise Maps. In all instances where you previously will have seen "Hands-Free" in your SYNC screen you will now see "BlueCruise". We’ve also updated your Ford BlueCruise map expiration to help keep things running smoothly. These updates will not change the way that you use BlueCruise.
Please note: As this is a major update to SYNC, you may find a small number of settings reverting to default. These may include your drive modes and automatic folding mirrors. I would recommend that after this update, you check that these settings are as you require them.
Ford Power-Up 6.5.0
This update is for 21MY and 22MY Mach-E only (Job 1 and Job 2). It is an update to the heating and ventilation system that will make enhancements to the heating capability and the vehicle's handling of humidity and will help to reduce fogging in certain conditions.
This update requires the vehicle's update schedule to be set (see point 2 at the start of this post).
Ford Power-Up 24-PU0102-CHG-SUFX
This update is for 21MY and 22MY Mach-E only (Job 1 and Job 2). The noticeable changes listed below primarily apply to 21MY vehicles as 22MY onwards had these from factory. There are further background updates which are applicable to all vehicles and are not listed below.
Note: Some customers already had an earlier version of this software applied during the windscreen / panoramic roof service action. This only applied to those customers who had the action completed quite late. As a result some 21MY customers will already have these changes. This answers earlier forum questions about why some early vehicles already had these.
Ford Power-Up 23-PU0110-RAD-PS - Audio Control update
This update is for 21MY and 22MY Mach-E only (Job 1 and Job 2). It prevents customers from losing their radio presets following an over-the-air software update to any module.
Ford Power-Up 23-PU0924-DLDC *NEW
This update is for 21MY and 22MY Mach-E only (Job 1 and Job 2) with double locking only. This will mostly be for vehicles sold in the UK and Ireland. Double locking was only an option in other European markets. This is a background update to prepare your vehicle for the next update below.
Ford Power-Up 24-PU0121-FTDI-FX *NEW
This update is for all 21MY and 22MY Mach-E only (Job 1 and Job 2).
For all customers, this update enhances your Frunk ajar warning system for when you drive away without your Frunk being fully closed.
For customers with Phone as a Key, this update adds the Frunk release to your FordPass app.
For customers of 21MY Job 1 vehicles, this update prepares your vehicle for further Frunk updates which will arrive with future Ford Power-Up Software Updates.
on 28 November 2023 03:02 15
Welcome back!
Since the last batch of updates on my 22MY Mach-e (up to 23-PU1103-NAT-VCE), I've had issues with my driver profile being deleted and defaulting back to guest. When I try to add a profile back it says its saving the profile but almost every time eventually times out saying "Process interrupted". If I'm lucky a profile will stay for a few days but always eventually disappears. Similarly, if I managed to keep it for a few days and bravely try to edit it to add a phone number, it can't save and the whole profile disappears almost immediately. I've tried with good mobile signal and with Wi-Fi connected all with the same results. Any thoughts?
on 01 December 2023 12:16 12
Thread updated this morning to add release of Ford Power-Up Software Updates for 21MY Mustang Mach-E (Job 1 and Job 2). Updates have also been released in Ford Power-Up 4 and 5 and I've updated that thread with details of those too.
on 01 December 2023 03:14 15
Does this batch of updates have the electronic opening of the frunk included? I have the button on screen to do it on my MY21 (Job1) car but pressing it does absolutely nothing (my dealer was next to useless in finding out why).
on 01 December 2023 03:29 15
Hi @saltski This batch does not include any frunk updates.
on 01 December 2023 05:07 17
Thanks for letting me know. Shame that is still not included as it was promised 24 months ago to be ‘coming soon’.